Our Equipment
EISPM- WE REBUILD ALL WHALLON PD90’S AND PROVIDE A MUCH STRONGER INNER TUBE SUPPORT:
– WE TAKE WHALLON PD90’S AND STRIPPED THEM DOWN AND SAND BLAST AND THEN MAKE NECESSARY CHANGES TO UNIT FOR BEST DESIGNED REBUILD
– CHANGE BEARINGS TO NEW NYLATRON BEARING KIT WITH GREASE CERTS THAT ARE LOCATED IN MOUNTING BOLTS, WITH NEW COLD ROLL STEEL SLEEVES THAT ARE CENTERED TO NEW HEAVIER DUTY DESIGNED INNER TUBE ASSEMBLY, WITH NYLATRON WEAR PLATE THAT HAVE GREASE CERTS.
– TUBE WILL BE SAND BLASTED AND POWDER COATED TO COLOR OF EXISTING EQUIPMENT FOR LONG LASTING PROTECTION OF MACHINE.
– WE ALSO UPGRADE MACHINES TO HIGH-SPEED OPTION AT YOUR REQUEST WHICH WOULD ALIMINATE OLD DECEL VALVES THAT ARE VERY EXPENSIVE TO REPLACE. WE USE A DC PROPORTIONAL VALVE SYSTEM FOR FASTER AND SMOOTHER RESULTS.
– EISPMI HAS DESIGNED A HEAVY-DUTY POPUP TRANSFER CONVEYOR SYSTEM FOR EMPTY PALLET DELIVERY OR PARTIAL PALLET DELIVERY. ITS MADE OF 1/4’” STEEL DESIGNED FRAMEWORK WITH 4- CYLINDER LIFT SYSTEM, SMC VALVE CONTROLS LOW VOLTAGE 24 VDC OR 120 VOLTS AC, ALL CONTROLS ARE AB PHOTEYES OR PROXIMITY SENSORS.
– ALL CONVEYORS ARE POWDER COATED BLUE AND GUARDING POWDER COATED SAFETY YELLOW.
EISPMI FULL PALLET POPUP TRANSFER CONVEYOR SYSTEM:
– EISPMI FULL PALLET POPUP SYSTEM THAT IS BUILT TOUGH OUT OF ¼ STEEL FRAME WORKS AND DELIVERS A LONG LASTING LIFE. WE USE A FOUR-AIR CYLINDER LIFT SYSTEM FOR EVEN LIFT OF FULL PALLET OF PRODUCT. THIS UNIT DOESN’T COMPARE TO OTHERS THAT STAMP OUT THEIR FRAMES WITH LIGHT WEIGHT STEEL AND FLIMSY FRAMES. WE BUILD OUR CONVEYORS TO LAST FOR YEARS WITH VERY LITTLE MAINTENANCE. ALL POWDER COATED BLUE FRAME WITH GUARDING POWDER COATED SAFETY YELLOW.
EISPMI FULL OR EMPTY PALLET CONVEYORS ARE BUILT TOUGH WITH ¼’ WALL OF STEEL:
– EISPMI DESIGNED PALLET CONVEYORS WITH 1-HP OUTSIDE DRIVE FOR EASY ACCESS OF DRIVE MOTOR, ¼” STEEL FRAME WORK WITH HEAVY DUTYCHAIN TRACK AND CHAIN DRIVE SYSTEM. WE ALSO HAVE INTERNAL ¾-HP MOTOR DRIVE WITH SPROCKETS AND CHAINS WHEN NEEDED. CONVEYORS ARE POWDER COATED BLUE WITH ANY GUARDING POWDER COATED SAFETY YELLOW.
EISPMI #-1 DESIGNED RARE EARTH MAGNET HEADS FOR PD 90’S OR OTHER APPLICATIONS:
EISPMI HAS DESIGNED A TOP QUALITY RARE EARTH MAGNET HEAD THAT CAN BE MOUNTED EITHER WAY OF PALLET DESIGN. THESE ARE BUILD TO LAST FOR YEARS COMPARED TO OTHERS DESIGNED HEADS. THEY HOLD CAN FIRMLY IN POSITION FOR NIECE STRAIGHT STACKS OF CANS.
WE ALSO BUILD CUSTOM RARE EARTH MAGNET HEADS FOR OTHER TYPES OF EQUIPMENT, SUCH AS DOUGLAS TRAY PACKERS, FMC MACHINES AND SIMPLIMATIC DEPALLETIZERS. PLEASE CALL WITH YOUR NEEDS.
EISPMI SPD8 FULLY-AUTOMATICALL ELECTRIC SERVO DRIVEN SHUTTLE PALLETIZER/DEPALLETIZER SYSTEMS:
– EISPMI ALL ELECTRIC SHUTTLE PALLETIZER/DEPPALETIZER SYTEM CAN BE EITHER/OR AN ACCUMULATION SYSTEM. THIS IS THE BASE SYSTEM FOR LOWER SPEED OF CAN DELIVERY. THIS SYTEM HAS ALL ELECTRIC DRIVES FOR LIFT PALLET TO EITHER DEPAL CAN OR TO CUT CYCLE TIME DOWN FOR EITHER.
– THE SHUTTLE CARRIGE USES A SERVO DRIVEN DRIVE SYSTEM FOR LATERIAL TRAVEL WITH USING A SERVO DRIVEN DRIVE FOR FAST AND SMOOTH TRANSITION OF FAST SPEED TO SLOW SPEED TO AND FROM ACCUMULATION TABLE.
– ALL ELECTRIC 4-#80 CHAIN LIFT SYTEM, WITH SERVO DRIVEN DIRECT CONNECT DRIVES FOR FAST AND SMOOTH DELIVERY TO DRIVE FOR LIFTING FULL OR EMPTY PALLETS TO POSITION.
– PALLET CONVEYORS ARE DESIGNED FOR HEAVY DUTY CYCLING OF PALLET DELIVERY SYSTEM, WITH OUTSIDE DRIVES FOR EASY ACCESS FOR MAINTENANCE, 1-HP EURODRIVE FIXED GEARMOTOR WITH AB 525 VFD DRIVE SYSTEM FOR SMOOTH TAKE OFFS AND FASTER DELIVERY TO NEXT POSITION.
– PALLET DISPENSER WITH HEAVY DUTY DESIGNED FRAME WORK WITH ¼” STEEL CONSTRUCTION, USING SELF CONTAINED HYDRAULIC LIFT SYSTEM FOR SMOOTH LIFTING. WE USE HEAVY DUTY SQUARE TAPPER PINS FOR HOLDING PALLETS IN POSITION, ALSO INCLUDING PIN JAM SENSOR FOR BROKEN PALLETS THAT JAM PALLETS. ALL CONTROLS ARE AB PHOTEYES AND PROXIMITY SENSORS, SMC VALVES CONTROLS FOR SHOT PINS.
– CONTROL PANEL DEPENDS ON TYPE OF SHUTTLE THAT IS BEING PURCHASED AND IF IT’S A FULLY AUTOMATIC SYSTEM OR SEMI-AUTOMATIC SYSTEM. WE USE AB PLC’S AND CONTROLS.
WPCS50 wood pallet cleaning system:
– The wood pallet cleaning system is setup to Laser scan pallets before cleaning to make sure that cleaning heads can safely enter the middle of the pallet. The laser scanner is on a belt driven drive to laser read the board widths and look to see if dummy boards have been added to fix broken pallet. If the pallets have been fixed the laser scanner will be able to measure openings to determine if the cleaning head with fit. If it reads there isn’t enough room, it with send pallet straight through system and stack on other side as unusable pallet and are deemed junk pallets. This unit can clean up to 60 pallets and hour. Once a pallet is ok for cleaning it has a top and bottom sweep brush roller that sweep both side before entering cleaning area which has a vacuum chamber that vacuums up dust and Debre and has a bin for large pieces of wood to drop into. Next it will stop at cleaning station which clamps the pallet and then the three brush heads with air shots will enter the pallet and scrub left side and go all the way through and then move to right side and come back through to clean other side. Once cleaned it will go out to be stacked or take off conveyor before stacker.